Can polished concrete floors be slippery when wet? Several web sites say yes, but others (mostly polished concrete vendors) say no, it only looks that way. A study of polished concrete published by the American Society of Concrete Contractors (ASCC) in Concrete International shows wet dynamic coefficients of friction (DCOF) as measured by ANSI A137.1 […]
Archive | Anti-Slip Coatings — Do-It-Yourself
RSS feed for this sectionBeware of Slippery Finished-in-Place Floors Installed by Clueless Contractors
Some floors are covered with premanufactured stuff, such as marble, granite or ceramic tiles, wood, or vinyl composite tile. Other floors are created in place — including epoxy, terrazzo, and concrete. Topical sealers added to premanufactured floors also constitute a finished-in-place surface — the pedestrian is not walking on the flooring, but on the sealer. […]
Surveillance to Detect Slip and Fall Hazards on Commercial Floors
Surveillance of floors to detect spills, dropped produce, and other hazards is an important part of many safety plans, particularly on floors that have poor wet slip resistance. This includes most floors in customer areas of supermarkets. In one supermarket slip and fall case, a court ruled that inspections every 12 minutes were necessary in […]
Financial losses from slip and fall accidents
Slip and fall accidents are the #1 reason Americans show up at emergency rooms, according to data from the CDC. Slippery floors are a silent epidemic in America, and lawsuits are filed daily across the nation involving major injuries and deaths from slippery floors. Unless the negligent party is the victim’s employer, the victim of […]
Roughness and Wet Floor Slip Resistance
We all know intuitively that roughness has a lot to do with floor slip resistance. Very smooth floors tend to have low wet slip resistance, and to some types of shoe solings (as on some dancing shoes) can have low dry slip resistance too. However, “rough” appearing floors aren’t always slip-resistant, and this has to […]
What’s the Cost of a Slip and Fall on a Commercial Property?
A recent article in Risk & Insurance (May 2018, p. 32) cites some data for costs of slip and fall claims. Claims can result in a sharp increase in insurance premiums. If the property is self-insured, costs can come directly off profit. Falls among adults are the most common cause of traumatic brain injury. Commercial […]
Test Your New Pool Deck’s Slip Resistance BEFORE Opening the Pool!
It is amazing how often both large and small swimming pool decks are installed with no thought to wet slip resistance until falls, sometimes catastrophic, begin to happen. By the time the first serious slip injury happens, the flooring vendor has usually cashed his check and is unconcerned about the problem. Wet bare feet have […]
How to Make Your Shoes Less Slippery
At Safety Direct America, we focus on making surfaces less slippery and easier to walk on with our slip resistance testing and anti-slip coatings. But what if you find yourself at work or in a public place, and discover that your shoes are the real problem? Whether your shoes are slippery because they’re too […]
A Caveat about Dal-Tile’s Situation-Specific Minimum DCOF AcuTest Values
This blog has previously praised Dal-Tile for recognizing that “one size fits all” does not work when it comes to slip resistance standards (or bikinis, for that matter). For instance, Dal-Tile has recommended a minimum ANSI A137.1 DCOF AcuTest wet dynamic coefficient of friction of 0.60 for swimming pool decks, public showers, and locker rooms. […]
ANSI Issuing Another Standard Slip Test Method for Flooring Materials
The American National Standards Institute (ANSI) is issuing a new test method, with minimum dynamic coefficient of friction (DCOF rating), for slip resistance of hard flooring materials, wet or dry, laboratory or field testing. No minimum DCOF is provided for exterior applications. The BOT-3000E digital tribometer is used for the testing. The Secretariat for the […]