Tag Archives: sparkletuff anti-slip

CoatingsPro article: How to Specify a Slip-Resistant Floor Coating

An article in the March 2020 edition of CoatingsPro™ Magazine details how to specify an anti-slip floor coating, specifically a transparent one. (A printable version of the article is also available.) After establishing a reliable method to determine wet slip resistance, the article discusses initial slip resistance safety criteria; durability testing of the coating’s slip […]

Slip Resistance Safety for Industrial and Commercial Areas

Minimum wet slip resistance values (as wet Pendulum Test Values) for safety in many publicly accessible areas are listed elsewhere on this blog. But what about industrial areas used for very slippery operations like meat or fish processing, making mayonnaise or refining cooking oils, and for aircraft repair hangars? Guidance for these, recommended since 1999, […]

Germany’s DIN 51130 Slip Test: What’s it Good For?

In Europe a slip resistance test for flooring is prescribed by German Institute for Normalization (DIN) standard DIN 51130. A person wearing industrial-type treaded shoes walks, facing downslope, on a variable-angle ramp which has the flooring to be tested on it. The flooring is coated with motor oil. The walker (without holding the handrails) adjusts […]

SparkleTuff Outdoors on Level Surface and Stairs: 30-second video

The video below shows an outdoor level surface and stairs at a large mall, coated with transparent SparkleTuff™ Anti-Slip. A pedestrian walks down the stairs, which are partially wet from the previous day’s rain. With a material cost of about a dollar a square foot, SparkleTuff™ has excellent wet slip resistance by all respected test […]

Beware of Slippery Finished-in-Place Floors Installed by Clueless Contractors

Some floors are covered with premanufactured stuff, such as marble, granite or ceramic tiles, wood, or vinyl composite tile. Other floors are created in place — including epoxy, terrazzo, and concrete. Topical sealers added to premanufactured floors also constitute a finished-in-place surface — the pedestrian is not walking on the flooring, but on the sealer. […]

Surveillance to Detect Slip and Fall Hazards on Commercial Floors

Surveillance of floors to detect spills, dropped produce, and other hazards is an important part of many safety plans, particularly on floors that have poor wet slip resistance. This includes most floors in customer areas of supermarkets. In one supermarket slip and fall case, a court ruled that inspections every 12 minutes were necessary in […]

Test Your New Pool Deck’s Slip Resistance BEFORE Opening the Pool!

It is amazing how often both large and small swimming pool decks are installed with no thought to wet slip resistance until falls, sometimes catastrophic, begin to happen. By the time the first serious slip injury happens, the flooring vendor has usually cashed his check and is unconcerned about the problem. Wet bare feet have […]

A Caveat about Dal-Tile’s Situation-Specific Minimum DCOF AcuTest Values

This blog has previously praised Dal-Tile for recognizing that “one size fits all” does not work when it comes to slip resistance standards (or bikinis, for that matter). For instance, Dal-Tile has recommended a minimum ANSI A137.1 DCOF AcuTest wet dynamic coefficient of friction of 0.60 for swimming pool decks, public showers, and locker rooms. […]

Introducing SparkleTuff™ Anti-Slip Floor Coating

For over a decade, we have been on the search for a totally non-slip and very glossy floor coating that could help people who have had the misfortune of installing slippery tiles, or those who have slippery tubs or showers. We’ve seen several attempts over the years in our floor slip resistance testing business, but […]