Click Fraud Protection

Tag Archives: slip resistance test

What Should the Slip Resistance of a Bathtub Be?

Bathtubs, in hotels or homes, are in areas where slip accidents can be very serious or fatal because there are hard objects in close proximity that can be easily struck by the head after a slip — the side of the tub, the faucet, toilets and sinks. Bare feet are soft and essentially treadless, and […]

Slip Resistance Safety for Industrial and Commercial Areas

Minimum wet slip resistance values (as wet Pendulum Test Values) for safety in many publicly accessible areas are listed elsewhere on this blog. But what about industrial areas used for very slippery operations like meat or fish processing, making mayonnaise or refining cooking oils, and for aircraft repair hangars? Guidance for these, recommended since 1999, […]

New Study Shows Sotter Engineering to be one of World’s Most Accurate Pendulum Floor Slip Test Labs

A recent global interlaboratory program “Slip Resistance Proficiency Testing — Pendulum Friction Tester,” showed Sotter Engineering Corporation’s Safety Direct America (SDA) floor slip resistance testing laboratory to be one of the world’s most accurate in use of the pendulum skid tester. The pendulum is a national standard for pedestrian floor and tile slip resistance testing […]

ANSI A326.3 Acutest Does Not Predict Likelihood of Slip

A widely used floor friction test, American National Standards Institute A326.3, states in its introduction that “it can provide a useful comparison of surfaces, but it does not predict the likelihood a person will or will not slip on a hard surface flooring material.” The test assesses wet dynamic coefficient of friction (DCOF) using the […]

ASTM F2508 and the pendulum slip resistance tester

ASTM F2508 is based on a rigorous scientific study of 11 tribometers (or floor slip resistance test devices) that was held at the University of Southern California Medical Center. The peer-reviewed results were published in 2010 in the Journal of Forensic Sciences. Four tiles were tested with the 11 slip test devices, and later a […]

Test Your New Pool Deck’s Slip Resistance BEFORE Opening the Pool!

It is amazing how often both large and small swimming pool decks are installed with no thought to wet slip resistance until falls, sometimes catastrophic, begin to happen. By the time the first serious slip injury happens, the flooring vendor has usually cashed his check and is unconcerned about the problem. Wet bare feet have […]

DCOF Rating for Floors

The latest American slip test for floors is the DCOF rating test method specified in ANSI A326.3. Although this test is a much better test than the now-withdrawn ASTM C1028 that was previously included in the International Building Code, the new test method comes with a great deal of “disclaimers”, including the warning that a […]

A Caveat about Dal-Tile’s Situation-Specific Minimum DCOF AcuTest Values

This blog has previously praised Dal-Tile for recognizing that “one size fits all” does not work when it comes to slip resistance standards (or bikinis, for that matter). For instance, Dal-Tile has recommended a minimum ANSI A137.1 DCOF AcuTest wet dynamic coefficient of friction of 0.60 for swimming pool decks, public showers, and locker rooms. […]

Why We Offer a “Recommended Tile Slip Test Package”

When our clients ask for an ANSI/NFSI A137.1 test we often recommend that they order a pendulum test as well. The pair of floor slip resistance tests is popular, and we offer a discounted price of $387.00 (for lab testing) when they are ordered together. The reason has to do with the A137.1 standard — […]

Dal-Tile Recommends Situation-Specific Minimum DCOF AcuTest Values

We have pointed out before that the ANSI A137.1 “DCOF AcuTest” and ANSI A326.3 minimum recommended wet dynamic coefficient of friction (DCOF rating) for level wet indoor areas of 0.42 is “one size fits all” and does not consider the use of the flooring — upstairs elevator lobby, commercial kitchen, pool deck, etc. The traction […]