Archive | ANSI A326.3

RSS feed for this section

2022 Revised ANSI A326.3 Has Five Situation-Specific DCOF Minimums — And Crucial Caveats

In February of 2022, the American National Standards Institute (ANSI) issued a revised version of their “Test Method for Measuring Dynamic Coefficient of Friction of Hard Surface Flooring Materials.” Situation-specific recommended minimum DCOF values range from 0.42 to 0.55. As in previous versions, this one has important caveats. E.g., “The specifier shall determine materials appropriate […]

BOT-3000E Manufacturer Advises Against Using ANSI/NFSI B101.3 and B101.1 to Assess Floor Slip Resistance

The manufacturer of the BOT-3000E digital tribometer is Regan Scientific Instruments of Carrollton (Dallas), Texas. Recently we asked Regan for an update on ANSI B101.3, “Test Method for Measuring Wet DCOF of Common Hard-Surface Floor Materials,” approved January 18, 2012, and ANSI/NFSI B101.1. We received a reply from Peter Ermish, President. Here’s part of his […]

Maximum Coefficient of Friction is not Limited to 1.00

It’s sometimes assumed that coefficient of friction (COF) has a maximum theoretical and practical  value of 1.00. This isn’t true; there is no maximum. It is true that values exceeding 1.00 are so slip-resistant that their actual value is often of little interest. Some COF measuring instruments, such as BOT-3000E and English XL, are not […]

A Review of Standards for Pedestrian Slip Resistance Testing

There are a number of floor slip test methods established by standards-setting organizations that assess pedestrian slip resistance. Here we’ll review the most widely known and current ones. They are distinguished by the devices used in the testing. Terms such as DCOF rating, coefficient of friction, slip coefficient, slip resistance rating, and friction coefficient all […]

Floor Slip Rating: SCOF vs. DCOF

Static coefficient of friction (SCOF) was formerly used to measure the slip resistance of a wet floor in the USA, but the test method (ASTM C1028) was withdrawn by the ASTM in 2014. Experts in the USA now know to use dynamic coefficient of friction (DCOF), as the rest of the world has been using […]

ANSI A326.3 Acutest Does Not Predict Likelihood of Slip

A widely used floor friction test, American National Standards Institute A326.3, states in its introduction that “it can provide a useful comparison of surfaces, but it does not predict the likelihood a person will or will not slip on a hard surface flooring material.” The test assesses wet dynamic coefficient of friction (DCOF) using the […]