Click Fraud Protection

Tag Archives: slip resistance test

America Gets Another Terrible, Horrible, No Good, Very Bad Slip Resistance Guideline

Wet, bare feet are soft and essentially treadless, and on a slippery hard floor can be treacherous — leading to falls that sometimes cause permanent brain damage or worse. It’s crucial to provide slip-resistant surfaces at swimming pools where people (some of them sober) will be walking, playing or running (even against the rules) with […]

Pendulum: The Most Widely Used Slip Resistance Test Worldwide

The pendulum skid tester, known in the U.S. as the “British pendulum” although it was invented at the U.S. National Bureau of Standards, is the most widely used floor slip resistance tester worldwide for measuring the slip resistance of pedestrian surfaces (DCOF rating). It is a national floor slip test standard in at least 49 […]

ANSI Issuing Another Standard Slip Test Method for Flooring Materials

The American National Standards Institute (ANSI) is issuing a new test method, with minimum dynamic coefficient of friction (DCOF rating), for slip resistance of hard flooring materials, wet or dry, laboratory or field testing. No minimum DCOF is provided for exterior applications. The BOT-3000E digital tribometer is approved for testing. The Secretariat for the new […]

Slip Resistance of Basketball and Volleyball Floors

Floors for indoor sports (basketball, volleyball, gym, etc.) need careful attention to their dry slip resistance. Players must have enough traction to start and stop quickly, yet not so much that they can’t pivot rapidly. Fortunately, there are well-defined and long-accepted standards for the slip resistance of these floors, using the pendulum skid testing instrument […]

Floor and Tile Slip Resistance Testing Lab: Fast Turnaround AND Low Prices

Safety Direct America makes a specialty of floor slip resistance (coefficient of friction) testing, offering both fast turnaround times and low prices. Here’s a comparison with our chief competitor, using ANSI A137.1 dynamic coefficient of friction testing (DCOF AcuTest) as an example: Turnaround time                   Our price     […]

Slip Resistance of Floor Graphics

The September/October 2016 edition of SGIA Journal (Special Graphic Imaging Association), pp 89–92 has an article, “New Slip Resistance Specifications — Are You in Compliance?”, by the Marketing Manager of Mactac Distributor Products (“Technology that Sticks”, including indoor and outdoor floor graphics). He discusses the following about American National Standards Institute (ANSI) Standard B101.3:     […]

COF vs. Pendulum Test Value

Pendulum slip (or skid) resistance data are usually expressed as PTV, Pendulum Test Value (or sometimes BPN, British Pendulum Number, or even SRV, Slip Resistance Value). The question has been asked, “What’s the coefficient of friction?” This number (dynamic COF) was calculated decades ago at the U.S. National Bureau of Standards, and can be obtained […]

A bulletproof defense against slip-fall losses

If someone falls, or claims to have fallen, due to a slip on your premises, the key question from a responsibility standpoint is, were you negligent? And did your negligence contribute to the alleged accident? Here’s how to best assure that you won’t be found negligent. You need to do everything a reasonable person can […]

New Anti-Slip Floor Design Guidelines Aid in Safe Floor Selection

After consulting with many experts in the USA and abroad, including Safety Direct America, Specialty Architectural Products (SAP) in Toledo, Ohio has distributed four-page design guidelines (Design Guide – Anti-Slip) for floor slip resistance testing. The Slip Resistance Test Guidelines are intended to help building owners, architects, interior designers, specification professionals, and graphic designers, mainly […]

Video Explains IBC Requirements for Floor Slip Resistance

The 2012 International Building Code changed slip resistance requirements for indoor floors that may get wet in use. The previously-used ASTM C 1028 friction test method is obsolete, and testing using the AcuTest method in ANSI A137.1 slip test must show a minimum of 0.42 wet dynamic coefficient of friction — but many other factors […]