Click Fraud Protection

Tag Archives: slip and fall

Surveillance to Detect Slip and Fall Hazards on Commercial Floors

Surveillance of floors to detect spills, dropped produce, and other hazards is an important part of many safety plans, particularly on floors that have poor wet slip resistance. This includes most floors in customer areas of supermarkets. In one supermarket slip and fall case, a court ruled that inspections every 12 minutes were necessary in […]

Financial losses from slip and fall accidents

Slip and fall accidents are the #1 reason Americans show up at emergency rooms, according to data from the CDC. Slippery floors are a silent epidemic in America, and lawsuits are filed daily across the nation involving major injuries and deaths from slippery floors. Unless the negligent party is the victim’s employer, the victim of […]

ANSI A326.3 Acutest Does Not Predict Likelihood of Slip

A widely used floor friction test, American National Standards Institute A326.3, states in its introduction that “it can provide a useful comparison of surfaces, but it does not predict the likelihood a person will or will not slip on a hard surface flooring material.” The test assesses wet dynamic coefficient of friction (DCOF) using the […]

ASTM F2508 and the pendulum slip resistance tester

ASTM F2508 is based on a rigorous scientific study of 11 tribometers (or floor slip resistance test devices) that was held at the University of Southern California Medical Center. The peer-reviewed results were published in 2010 in the Journal of Forensic Sciences. Four tiles were tested with the 11 slip test devices, and later a […]

Test Your New Pool Deck’s Slip Resistance BEFORE Opening the Pool!

It is amazing how often both large and small swimming pool decks are installed with no thought to wet slip resistance until falls, sometimes catastrophic, begin to happen. By the time the first serious slip injury happens, the flooring vendor has usually cashed his check and is unconcerned about the problem. Wet bare feet have […]

Why We Offer a “Recommended Tile Slip Test Package”

When our clients ask for an ANSI/NFSI A137.1 test we often recommend that they order a pendulum test as well. The pair of floor slip resistance tests is popular, and we offer a discounted price of $387.00 (for lab testing) when they are ordered together. The reason has to do with the A137.1 standard — […]

What are Some Less Common Causes of Slip and Fall Accidents?

Slips and falls account for as much as 15% of all accidental deaths every year; only motor vehicle accidents cause a larger percentage. Even when they aren’t fatal, they have a big economic impact—causing 25% of all reported injury claims per fiscal year and being responsible for 95 million days of lost work per year. […]

ANSI Issuing Another Standard Slip Test Method for Flooring Materials

The American National Standards Institute (ANSI) is issuing a new test method, with minimum dynamic coefficient of friction (DCOF rating), for slip resistance of hard flooring materials, wet or dry, laboratory or field testing. No minimum DCOF is provided for exterior applications. The BOT-3000E digital tribometer is approved for testing. The Secretariat for the new […]

Fixing Your Slippery Epoxy Floor

We are continually amazed at how often contractors will install an epoxy floor coating with little or no effort to make it slip-resistant under its known conditions of use — namely, sometimes wet and/or greasy. This happens in commercial, industrial, and household situations. Sometimes there’s no abrasive added to help with wet slip resistance. Other […]

John Glenn’s career-changing slip and fall

The world mourns the loss of pioneering astronaut and former U.S. senator John H. Glenn Jr., who in 1959 became one of America’s first astronauts, one of the “Mercury Seven,” and was the first American to orbit the Earth. Less remembered is the slip-and-fall accident that was a major factor in his early political career, […]