Tag Archives: coefficient of friction test

Test Your New Pool Deck’s Slip Resistance BEFORE Opening the Pool!

It is amazing how often both large and small swimming pool decks are installed with no thought to wet slip resistance until falls, sometimes catastrophic, begin to happen. By the time the first serious slip injury happens, the flooring vendor has usually cashed his check and is unconcerned about the problem. Wet bare feet have […]

Comments Off on Test Your New Pool Deck’s Slip Resistance BEFORE Opening the Pool! Continue Reading →

Why We Offer a “Recommended Tile Slip Test Package”

When our clients ask for an ANSI/NFSI A137.1 test we often recommend that they order a pendulum test as well. The pair of floor slip resistance tests is popular, and we offer a discounted price of $414.00 (for lab testing) when they are ordered together. The reason has to do with the A137.1 standard — […]

Dal-Tile Recommends Situation-Specific Minimum DCOF AcuTest Values

We have pointed out before that the ANSI A137.1 “DCOF AcuTest” and ANSI A326.3 minimum recommended wet dynamic coefficient of friction (DCOF rating) for level wet indoor areas of 0.42 is “one size fits all” and does not consider the use of the flooring — upstairs elevator lobby, commercial kitchen, pool deck, etc. The traction […]

Comments Off on Dal-Tile Recommends Situation-Specific Minimum DCOF AcuTest Values Continue Reading →

America Gets Another Terrible, Horrible, No Good, Very Bad Slip Resistance Guideline

Wet, bare feet are soft and essentially treadless, and on a slippery hard floor can be treacherous — leading to falls that sometimes cause permanent brain damage or worse. It’s crucial to provide slip-resistant surfaces at swimming pools where people (some of them sober) will be walking, playing or running (even against the rules) with […]

Comments Off on America Gets Another Terrible, Horrible, No Good, Very Bad Slip Resistance Guideline Continue Reading →

ANSI Issuing Another Standard Slip Test Method for Flooring Materials

The American National Standards Institute (ANSI) is issuing a new test method, with minimum dynamic coefficient of friction (DCOF rating), for slip resistance of hard flooring materials, wet or dry, laboratory or field testing. No minimum DCOF is provided for exterior applications. The BOT-3000E digital tribometer is used for the testing. The Secretariat for the […]

Comments Off on ANSI Issuing Another Standard Slip Test Method for Flooring Materials Continue Reading →

Slip Resistance of Basketball and Volleyball Floors

Floors for indoor sports (basketball, volleyball, gym, etc.) need careful attention to their dry slip resistance. Players must have enough traction to start and stop quickly, yet not so much that they can’t pivot rapidly. Fortunately, there are well-defined and long-accepted standards for the slip resistance of these floors, using the pendulum skid testing instrument […]

Floor and Tile Slip Resistance Testing Lab: Fast Turnaround AND Low Prices

Safety Direct America makes a specialty of floor slip resistance (coefficient of friction) testing, offering both fast turnaround times and low prices. Here’s a comparison with our chief competitor, using ANSI A137.1 dynamic coefficient of friction testing (DCOF AcuTest) as an example: Turnaround time                   Our price     […]

Comments Off on Floor and Tile Slip Resistance Testing Lab: Fast Turnaround AND Low Prices Continue Reading →

Water Parks: Inputs Wanted for Splash Pad Slip Resistance Standard

“Splash pads” are areas that contain water-play features and may contain play structures, but do not permit water to accumulate to any real depth. Their aliases include aquatic play pad, spray zone, spray pool, spray pad, spray deck, rain deck, and splash deck. There are 5,000–10,000 commercial or public splash pads in the USA, and […]

Comments Off on Water Parks: Inputs Wanted for Splash Pad Slip Resistance Standard Continue Reading →

Slip Resistance of Floor Graphics

The September/October 2016 edition of SGIA Journal (Special Graphic Imaging Association), pp 89–92 has an article, “New Slip Resistance Specifications — Are You in Compliance?”, by the Marketing Manager of Mactac Distributor Products (“Technology that Sticks”, including indoor and outdoor floor graphics). He discusses the following about American National Standards Institute (ANSI) Standard B101.3:     […]

Article published in The Construction Specifier magazine talks slip resistance

John C. Sotter and George Sotter of Safety Direct America were published in the July issue of The Construction Specifier magazine with an article talking about floor slip resistance and keeping floors safe for pedestrians. The article talks about the latest International Building Code (IBC) requirements for slip resistance, and its limitations as far as […]

Comments Off on Article published in The Construction Specifier magazine talks slip resistance Continue Reading →