The U.S. federal government’s Consumer Product Safety Commission (CPSC) is considering a petition requesting rule making to require that manufacturers of floor coverings, floor coverings with coatings, and treated floor coverings label their products’ slip resistance in accordance with an ANSI/National Floor Safety Institute (NFSI) standard, B101.5. (NFSI, Safety Direct America and others offer for-fee […]
Tag Archives: coefficient of friction test
A bulletproof defense against slip-fall losses
If someone falls, or claims to have fallen, due to a slip on your premises, the key question from a responsibility standpoint is, were you negligent? And did your negligence contribute to the alleged accident? Here’s how to best assure that you won’t be found negligent. You need to do everything a reasonable person can […]
New Anti-Slip Floor Design Guidelines Aid in Safe Floor Selection
After consulting with many experts in the USA and abroad, including Safety Direct America, Specialty Architectural Products (SAP) in Toledo, Ohio has distributed four-page design guidelines (Design Guide – Anti-Slip) for floor slip resistance testing. The Slip Resistance Test Guidelines are intended to help building owners, architects, interior designers, specification professionals, and graphic designers, mainly […]
“All Floors are Slippery When Wet — Right?”
Not right. The right flooring for the situation can be safely slip-resistant when wet or even when lubricated with oil or grease, as in a commercial kitchen or a parking structure. Most people will accept that a concrete sidewalk or a black-top road is slip-resistant wet for pedestrians. We can safety walk or even jog […]
Falls Deaths in the USA: a 9/11 Every Six Weeks
The National Safety Council’s (NSC) latest published statistics show that falls are causing 28,000 deaths in the USA annually (see p. 19 of their report). This is the equivalent of a 9/11/2001 attack every six weeks, all year long. Moreover, falls deaths are approaching motor-vehicle deaths. Safety Direct America offers products and services that can […]
Stop Slips on Cruise Ships!
Since 2008, Safety Direct America has been helping some of the world’s foremost cruise ship companies to prevent slips and falls by helping their designers choose flooring appropriate to the situation (with the correct level of wet coefficient of friction). The work improves safety both on new cruise ships and on ships that are routinely […]
OSHA’s “Suggestion” for Minimum Floor Coefficient of Friction (COF)
We often hear the question, “What does OSHA require for floor slip resistance?” The answer is that OSHA doesn’t require anything, but nevertheless has caused a lot of confusion for employers and the public on this subject. There has never been an official OSHA slip test or safety standard for flooring. In a nonmandatory appendix […]
What’s the Difference Between the Three ANSI standards for floor slip resistance?
The American National Standards Institute (ANSI) has three pedestrian floor friction standards involving tests using the BOT-3000E digital tribometer, intended for testing flooring for indoor use. Why do they have three standards, and what’s the difference between them? They all have different test methods and different minimum coefficient of friction values (0.42, 0.43, and 0.60). […]
When Should You Test Flooring for Slip Resistance?
Many building owners find themselves in trouble after a refurbishment or new build, because the flooring is unexpectedly slippery when wet. An entrance lobby, restroom, pool deck, spa, or factory floor are common locations where this problem occurs. When should flooring be tested for slip resistance? Some architects might say, “Never.” Many lawyers might say, […]
Do All Pedestrian Ramps Need the Same Coefficient of Friction?
The minimum safety standard for coefficient of friction for a pedestrian ramp should depend on the angle of the ramp and the weight of the separate load (shopping cart, wheelchair, gurney, etc.), if any, the pedestrian is controlling. However, that’s not how American safety standards are written. In the USA, traditionally safety standards for slip […]