A recent article in Risk & Insurance (May 2018, p. 32) cites some data for costs of slip and fall claims. Claims can result in a sharp increase in insurance premiums. If the property is self-insured, costs can come directly off profit. Falls among adults are the most common cause of traumatic brain injury. Commercial […]
Tag Archives: ANSI B101.3
Dal-Tile Recommends Situation-Specific Minimum DCOF AcuTest Values
We have pointed out before that the ANSI A137.1 “DCOF AcuTest” and ANSI A326.3 minimum recommended wet dynamic coefficient of friction (DCOF rating) for level wet indoor areas of 0.42 is “one size fits all” and does not consider the use of the flooring — upstairs elevator lobby, commercial kitchen, pool deck, etc. The traction […]
ANSI Issuing Another Standard Slip Test Method for Flooring Materials
The American National Standards Institute (ANSI) is issuing a new test method, with minimum dynamic coefficient of friction (DCOF rating), for slip resistance of hard flooring materials, wet or dry, laboratory or field testing. No minimum DCOF is provided for exterior applications. The BOT-3000E digital tribometer is used for the testing. The Secretariat for the […]
Floor and Tile Slip Resistance Testing Lab: Fast Turnaround AND Low Prices
Safety Direct America makes a specialty of floor slip resistance (coefficient of friction) testing, offering both fast turnaround times and low prices. Here’s a comparison with our chief competitor, using ANSI A137.1 dynamic coefficient of friction testing (DCOF AcuTest) as an example: Turnaround time Our price […]
Slip Resistance of Floor Graphics
The September/October 2016 edition of SGIA Journal (Special Graphic Imaging Association), pp 89–92 has an article, “New Slip Resistance Specifications — Are You in Compliance?”, by the Marketing Manager of Mactac Distributor Products (“Technology that Sticks”, including indoor and outdoor floor graphics). He discusses the following about American National Standards Institute (ANSI) Standard B101.3: […]
Proposed Federal Rule for Floor Slip Resistance
The U.S. federal government’s Consumer Product Safety Commission (CPSC) is considering a petition requesting rule making to require that manufacturers of floor coverings, floor coverings with coatings, and treated floor coverings label their products’ slip resistance in accordance with an ANSI/National Floor Safety Institute (NFSI) standard, B101.5. (NFSI, Safety Direct America and others offer for-fee […]
New Anti-Slip Floor Design Guidelines Aid in Safe Floor Selection
After consulting with many experts in the USA and abroad, including Safety Direct America, Specialty Architectural Products (SAP) in Toledo, Ohio has distributed four-page design guidelines (Design Guide – Anti-Slip) for floor slip resistance testing. The Slip Resistance Test Guidelines are intended to help building owners, architects, interior designers, specification professionals, and graphic designers, mainly […]
What’s the Difference Between the Three ANSI standards for floor slip resistance?
The American National Standards Institute (ANSI) has three pedestrian floor friction standards involving tests using the BOT-3000E digital tribometer, intended for testing flooring for indoor use. Why do they have three standards, and what’s the difference between them? They all have different test methods and different minimum coefficient of friction values (0.42, 0.43, and 0.60). […]
When Should You Test Flooring for Slip Resistance?
Many building owners find themselves in trouble after a refurbishment or new build, because the flooring is unexpectedly slippery when wet. An entrance lobby, restroom, pool deck, spa, or factory floor are common locations where this problem occurs. When should flooring be tested for slip resistance? Some architects might say, “Never.” Many lawyers might say, […]
Does ANSI Tile Spec A137.1 help protect you from liability for slipping accidents?
If you specify or buy flooring based on a minimum wet dynamic coefficient of friction of 0.42, you may be vulnerable to charges of negligence if a slipping injury occurs on that floor. Here we tell you why, and how to avoid the situation. American National Standards Institute (ANSI) issued its standard A137.1, “Specifications for […]