Click Fraud Protection

Tag Archives: Sustainable Slip Resistance

Germany’s DIN 51130 Slip Test: What’s it Good For?

In Europe a slip resistance test for flooring is prescribed by German Institute for Normalization (DIN) standard DIN 51130. A person wearing industrial-type treaded shoes walks, facing downslope, on a variable-angle ramp which has the flooring to be tested on it. The flooring is coated with motor oil. The walker (without holding the handrails) adjusts […]

A Review of Standards for Pedestrian Slip Resistance Testing

There are a number of floor slip test methods established by standards-setting organizations that assess pedestrian slip resistance. Here we’ll review the most widely known and current ones. They are distinguished by the devices used in the testing. Terms such as DCOF rating, coefficient of friction, slip coefficient, slip resistance rating, and friction coefficient all […]

Beware of Slippery Finished-in-Place Floors Installed by Clueless Contractors

Some floors are covered with premanufactured stuff, such as marble, granite or ceramic tiles, wood, or vinyl composite tile. Other floors are created in place — including epoxy, terrazzo, and concrete. Topical sealers added to premanufactured floors also constitute a finished-in-place surface — the pedestrian is not walking on the flooring, but on the sealer. […]

Financial losses from slip and fall accidents

Slip and fall accidents are the #1 reason Americans show up at emergency rooms, according to data from the CDC. Slippery floors are a silent epidemic in America, and lawsuits are filed daily across the nation involving major injuries and deaths from slippery floors. Unless the negligent party is the victim’s employer, the victim of […]

Roughness and Wet Floor Slip Resistance

We all know intuitively that roughness has a lot to do with floor slip resistance. Very smooth floors tend to have low wet slip resistance, and to some types of shoe solings (as on some dancing shoes) can have low dry slip resistance too. However, “rough” appearing floors aren’t always slip-resistant, and this has to […]

Floor Slip Rating: SCOF vs. DCOF

Static coefficient of friction (SCOF) was formerly used to measure the slip resistance of a wet floor in the USA, but the test method (ASTM C1028) was withdrawn by the ASTM in 2014. Experts in the USA now know to use dynamic coefficient of friction (DCOF), as the rest of the world has been using […]

ANSI A326.3 Acutest Does Not Predict Likelihood of Slip

A widely used floor friction test, American National Standards Institute A326.3, states in its introduction that “it can provide a useful comparison of surfaces, but it does not predict the likelihood a person will or will not slip on a hard surface flooring material.” The test assesses wet dynamic coefficient of friction (DCOF) using the […]

How does ANSI DCOF compare with Pendulum Test Value?

The most recent American National Standards Institute (ANSI) dynamic coefficient of friction (DCOF) test method, A326.3 (April 2017), states that “hard surface flooring materials suitable for level interior spaces expected to be walked upon when wet with water shall have a wet DCOF of 0.42 or greater when tested … as per this standard.” The […]

What’s the Cost of a Slip and Fall on a Commercial Property?

A recent article in Risk & Insurance (May 2018, p. 32) cites some data for costs of slip and fall claims. Claims can result in a sharp increase in insurance premiums. If the property is self-insured, costs can come directly off profit. Falls among adults are the most common cause of traumatic brain injury. Commercial […]

A Caveat about Dal-Tile’s Situation-Specific Minimum DCOF AcuTest Values

This blog has previously praised Dal-Tile for recognizing that “one size fits all” does not work when it comes to slip resistance standards (or bikinis, for that matter). For instance, Dal-Tile has recommended a minimum ANSI A137.1 DCOF AcuTest wet dynamic coefficient of friction of 0.60 for swimming pool decks, public showers, and locker rooms. […]