Tag Archives: DCOF

2022 Revised ANSI A326.3 Has Five Situation-Specific DCOF Minimums — And Crucial Caveats

In February of 2022, the American National Standards Institute (ANSI) issued a revised version of their “Test Method for Measuring Dynamic Coefficient of Friction of Hard Surface Flooring Materials.” The test method is called ANSI A326.3, and it sets a very low bar for DCOF in various flooring areas. Slip and fall accidents will likely […]

Comments Off on 2022 Revised ANSI A326.3 Has Five Situation-Specific DCOF Minimums — And Crucial Caveats Continue Reading →

Suggested Specifications for Lifetime Slip Resistance of Flooring

When we’re buying new automobile tires we’d like to know not only that the tires are good at the time of purchase, but that they will have a reasonably long lifetime for us. Michelin, for instance, offers models with mileage warranties (within a time limit) from 36,000 to 80,000 miles. When buying slip-resistant flooring, customers […]

Comments Off on Suggested Specifications for Lifetime Slip Resistance of Flooring Continue Reading →

How to Get Reliable and Useful Floor Slip Resistance Test Results

Slip and fall injuries can carry total liabilities that are often in the hundreds of thousands of dollars or even more. Investment in flooring is long-term and often involves appreciable capital, whether you are an individual homeowner or have a string of large office buildings and shopping centers. Though the charges for floor slip resistance […]

Comments Off on How to Get Reliable and Useful Floor Slip Resistance Test Results Continue Reading →

BOT-3000E Manufacturer Advises Against Using ANSI/NFSI B101.3 and B101.1 to Assess Floor Slip Resistance

The manufacturer of the BOT-3000E digital tribometer is Regan Scientific Instruments of Carrollton (Dallas), Texas. Recently we asked Regan for an update on ANSI B101.3, “Test Method for Measuring Wet DCOF of Common Hard-Surface Floor Materials,” approved January 18, 2012, and ANSI/NFSI B101.1. We received a reply from Peter Ermish, President. Here’s part of his […]

Comments Off on BOT-3000E Manufacturer Advises Against Using ANSI/NFSI B101.3 and B101.1 to Assess Floor Slip Resistance Continue Reading →

U.S. Senate Bipartisan Report: Falls Kill an American Senior Every 19 minutes

Lest we think that the U.S. Senate is capable only of partisan wrangling, the bipartisan Senate Aging Committee has published a report on falls prevention in efforts to protect those 65 and over from injury and premature death. Every 11 seconds an older American is treated in an emergency room for a fall. Every 19 […]

Comments Off on U.S. Senate Bipartisan Report: Falls Kill an American Senior Every 19 minutes Continue Reading →

Floor Slip Rating: SCOF vs. DCOF

Static coefficient of friction (SCOF) was formerly used to measure the slip resistance of a wet floor in the USA, but the test method (ASTM C1028) was withdrawn by the ASTM in 2014. Experts in the USA now know to use dynamic coefficient of friction (DCOF), as the rest of the world has been using […]

ANSI A326.3 Acutest Does Not Predict Likelihood of Slip

A widely used floor friction test, American National Standards Institute A326.3, states in its introduction that “it can provide a useful comparison of surfaces, but it does not predict the likelihood a person will or will not slip on a hard surface flooring material.” The test assesses wet dynamic coefficient of friction (DCOF) using the […]

Do All Pedestrian Ramps Need the Same Coefficient of Friction?

The minimum safety standard for coefficient of friction for a pedestrian ramp should depend on the angle of the ramp and the weight of the separate load (shopping cart, wheelchair, gurney, etc.), if any, the pedestrian is controlling. However, that’s not how American safety standards are written. In the USA, traditionally safety standards for slip […]

Comments Off on Do All Pedestrian Ramps Need the Same Coefficient of Friction? Continue Reading →