The National Safety Council’s (NSC) latest published statistics show that falls are causing 28,000 deaths in the USA annually (see p. 19 of their report). This is the equivalent of a 9/11/2001 attack every six weeks, all year long. Moreover, falls deaths are approaching motor-vehicle deaths. Safety Direct America offers products and services that can […]
Tag Archives: ANSI A137.1
What’s the Difference Between the Three ANSI standards for floor slip resistance?
The American National Standards Institute (ANSI) has three pedestrian floor friction standards involving tests using the BOT-3000E digital tribometer, intended for testing flooring for indoor use. Why do they have three standards, and what’s the difference between them? They all have different test methods and different minimum coefficient of friction values (0.42, 0.43, and 0.60). […]
When Should You Test Flooring for Slip Resistance?
Many building owners find themselves in trouble after a refurbishment or new build, because the flooring is unexpectedly slippery when wet. An entrance lobby, restroom, pool deck, spa, or factory floor are common locations where this problem occurs. When should flooring be tested for slip resistance? Some architects might say, “Never.” Many lawyers might say, […]
Slip-and-fall Fraud — Some Clues
How can you avoid slip-and-fall scams on your property? First and foremost, eliminate hazards. The initial step is testing floor slip resistance before a fall is reported. Failing that, pay attention when someone reports a slip, even if it didn’t lead to a fall or injury. That report put you on notice — you can’t […]
Does ANSI Tile Spec A137.1 help protect you from liability for slipping accidents?
If you specify or buy flooring based on a minimum wet dynamic coefficient of friction of 0.42, you may be vulnerable to charges of negligence if a slipping injury occurs on that floor. Here we tell you why, and how to avoid the situation. American National Standards Institute (ANSI) issued its standard A137.1, “Specifications for […]
Head Off Litigation with Third-Party Confidential Periodic Floor Slip Resistance Testing
Slips and falls can result from a wide range of causes. To avoid litigation your commercial property needs to be immune to claims that your negligence caused an injury. The most effective way of doing this is to have Safety Direct America periodically slip test your floors for slip resistance, and have your floor care […]
Situation-Specific Floor Slip Resistance Testing Standards
In the USA, pedestrian slip resistance standards for flooring have traditionally been pass-fail. For instance, a coefficient of friction (COF) of 0.60 might be considered “safe” but 0.59 was “not safe.” This applied to any situation provided the floor was level. Recently the American National Standards Institute (ANSI) has published some standards that are a […]
Variables that Affect Slip Resistance of Polished Concrete
At the 6th Annual International Concrete Polishing & Staining Conference in Atlanta in September 2013, a panel discussion was organized and chaired by Ken Fisher of Nu-Safe. On the panel were the manufacturer of the BOT-3000E tribometer (floor slip resistance test meter); an Orlando attorney for large international property owners; and slip and fall prevention […]
BOT-3000 Data Can Help Building Owners Monitor Changes in Floor Slip Resistance
Periodic testing of your company’s floors’ slip resistance can detect problems so they can be solved before they cause an accident, and can help verify that there are no remaining problems. Routine monitoring slip tests are typically conducted quarterly, semiannually, or annually. However, various unrelated pedestrian factors such as prescription and non-prescription drug use, intoxication, […]
Misleading ASTM C 1028 Friction Test Continues to Wreak Havoc in the USA
Misguided investments of hundreds of millions of dollars in slippery flooring … pain, suffering, and financial losses to accident victims and their families … lawsuits by the thousands … and lack of consumer confidence in ceramic tile and other hard flooring: these are some of the consequences of a poorly-conceived floor “slip-resistance” test — ASTM […]