Tag Archives: ANSI A137.1

DCOF Rating for Floors

The latest American slip test for floors is the DCOF rating test method specified in ANSI A326.3. Although this test is a much better test than the now-withdrawn ASTM C1028 that was previously included in the International Building Code, the new test method comes with a great deal of “disclaimers”, including the warning that a […]

A Caveat about Dal-Tile’s Situation-Specific Minimum DCOF AcuTest Values

This blog has previously praised Dal-Tile for recognizing that “one size fits all” does not work when it comes to slip resistance standards (or bikinis, for that matter). For instance, Dal-Tile has recommended a minimum ANSI A137.1 DCOF AcuTest wet dynamic coefficient of friction of 0.60 for swimming pool decks, public showers, and locker rooms. […]

Comments Off on A Caveat about Dal-Tile’s Situation-Specific Minimum DCOF AcuTest Values Continue Reading →

Dal-Tile Recommends Situation-Specific Minimum DCOF AcuTest Values

We have pointed out before that the ANSI A137.1 “DCOF AcuTest” and ANSI A326.3 minimum recommended wet dynamic coefficient of friction (DCOF rating) for level wet indoor areas of 0.42 is “one size fits all” and does not consider the use of the flooring — upstairs elevator lobby, commercial kitchen, pool deck, etc. The traction […]

Comments Off on Dal-Tile Recommends Situation-Specific Minimum DCOF AcuTest Values Continue Reading →

America Gets Another Terrible, Horrible, No Good, Very Bad Slip Resistance Guideline

Wet, bare feet are soft and essentially treadless, and on a slippery hard floor can be treacherous — leading to falls that sometimes cause permanent brain damage or worse. It’s crucial to provide slip-resistant surfaces at swimming pools where people (some of them sober) will be walking, playing or running (even against the rules) with […]

Comments Off on America Gets Another Terrible, Horrible, No Good, Very Bad Slip Resistance Guideline Continue Reading →

ANSI Issuing Another Standard Slip Test Method for Flooring Materials

The American National Standards Institute (ANSI) is issuing a new test method, with minimum dynamic coefficient of friction (DCOF rating), for slip resistance of hard flooring materials, wet or dry, laboratory or field testing. No minimum DCOF is provided for exterior applications. The BOT-3000E digital tribometer is used for the testing. The Secretariat for the […]

Comments Off on ANSI Issuing Another Standard Slip Test Method for Flooring Materials Continue Reading →

Floor and Tile Slip Resistance Testing Lab: Fast Turnaround AND Low Prices

Safety Direct America makes a specialty of floor slip resistance (coefficient of friction) testing, offering both fast turnaround times and low prices. Here’s a comparison with our chief competitor, using ANSI A137.1 dynamic coefficient of friction testing (DCOF AcuTest) as an example: Turnaround time                   Our price     […]

Comments Off on Floor and Tile Slip Resistance Testing Lab: Fast Turnaround AND Low Prices Continue Reading →

Slip Resistance of Floor Graphics

The September/October 2016 edition of SGIA Journal (Special Graphic Imaging Association), pp 89–92 has an article, “New Slip Resistance Specifications — Are You in Compliance?”, by the Marketing Manager of Mactac Distributor Products (“Technology that Sticks”, including indoor and outdoor floor graphics). He discusses the following about American National Standards Institute (ANSI) Standard B101.3:     […]

Article published in The Construction Specifier magazine talks slip resistance

John C. Sotter and George Sotter of Safety Direct America were published in the July issue of The Construction Specifier magazine with an article talking about floor slip resistance and keeping floors safe for pedestrians. The article talks about the latest International Building Code (IBC) requirements for slip resistance, and its limitations as far as […]

Comments Off on Article published in The Construction Specifier magazine talks slip resistance Continue Reading →

A bulletproof defense against slip-fall losses

If someone falls, or claims to have fallen, due to a slip on your premises, the key question from a responsibility standpoint is, were you negligent? And did your negligence contribute to the alleged accident? Here’s how to best assure that you won’t be found negligent. You need to do everything a reasonable person can […]

Video Explains IBC Requirements for Floor Slip Resistance

The 2012 International Building Code changed slip resistance requirements for indoor floors that may get wet in use. The previously-used ASTM C 1028 friction test method is obsolete, and testing using the AcuTest method in ANSI A137.1 slip test must show a minimum of 0.42 wet dynamic coefficient of friction — but many other factors […]

Comments Off on Video Explains IBC Requirements for Floor Slip Resistance Continue Reading →