Tag Archives: pendulum test

ADA Slip Resistance Requirements

The Americans with Disabilities Act (ADA) requires that floors accessible to disabled persons be “slip-resistant”, but does not define what that means. Apparently it’s up to property owners and the courts to decide. But there is a reliable way of assessing slip resistance that is recognized the world over to help comply with ADA slip […]

2022 Revised ANSI A326.3 Has Five Situation-Specific DCOF Minimums — And Crucial Caveats

In February of 2022, the American National Standards Institute (ANSI) issued a revised version of their “Test Method for Measuring Dynamic Coefficient of Friction of Hard Surface Flooring Materials.” The test method is called ANSI A326.3, and it sets a very low bar for DCOF in various flooring areas. Slip and fall accidents will likely […]

Comments Off on 2022 Revised ANSI A326.3 Has Five Situation-Specific DCOF Minimums — And Crucial Caveats Continue Reading →

Slip Resistance Standard for Swimming Pools, Spas, Hot Tubs, Splash Pads, etc.

The National Sanitation Foundation (NSF), together with American National Standards Institute (ANSI) and National Standard of Canada (CAN) established a slip resistance standard for recreational water facilities. Formalized in NSF/ANSI/CAN 50 – 2019, the standard requires a wet Slip Resistance Value, SRV, of 40 or greater, measured using the pendulum slip resistance test method. Though […]

Comments Off on Slip Resistance Standard for Swimming Pools, Spas, Hot Tubs, Splash Pads, etc. Continue Reading →

Suggested Specifications for Lifetime Slip Resistance of Flooring

When we’re buying new automobile tires we’d like to know not only that the tires are good at the time of purchase, but that they will have a reasonably long lifetime for us. Michelin, for instance, offers models with mileage warranties (within a time limit) from 36,000 to 80,000 miles. When buying slip-resistant flooring, customers […]

Comments Off on Suggested Specifications for Lifetime Slip Resistance of Flooring Continue Reading →

BOT-3000E Manufacturer Advises Against Using ANSI/NFSI B101.3 and B101.1 to Assess Floor Slip Resistance

The manufacturer of the BOT-3000E digital tribometer is Regan Scientific Instruments of Carrollton (Dallas), Texas. Recently we asked Regan for an update on ANSI B101.3, “Test Method for Measuring Wet DCOF of Common Hard-Surface Floor Materials,” approved January 18, 2012, and ANSI/NFSI B101.1. We received a reply from Peter Ermish, President. Here’s part of his […]

Comments Off on BOT-3000E Manufacturer Advises Against Using ANSI/NFSI B101.3 and B101.1 to Assess Floor Slip Resistance Continue Reading →

What Should the Slip Resistance of a Bathtub Be?

Bathtubs, in hotels or homes, are in areas where slip accidents can be very serious or fatal because there are hard objects in close proximity that can be easily struck by the head after a slip — the side of the tub, the faucet, toilets and sinks. Bare feet are soft and essentially treadless, and […]

Germany’s DIN 51130 Slip Test: What’s it Good For?

In Europe, a slip resistance test for flooring is prescribed by German Institute for Normalization (DIN) standard DIN 51130. A person wearing industrial-type treaded shoes walks, facing down slope, on a variable-angle ramp which has the flooring to be tested on it. The flooring is coated with motor oil. The walker (without holding the handrails) […]

Many Polished Concrete Floors are Slippery when Wet

Can polished concrete floors be slippery when wet? Several web sites say yes, but others (mostly polished concrete vendors) say no, it only looks that way. A study of polished concrete published by the American Society of Concrete Contractors (ASCC) in Concrete International shows wet dynamic coefficients of friction (DCOF) as measured by ANSI A137.1 […]

A Review of Standards for Pedestrian Slip Resistance Testing

There are a number of floor slip test methods established by standards-setting organizations that assess pedestrian slip resistance. Here we’ll review the most widely known and current ones. They are distinguished by the devices used in the testing. Terms such as DCOF rating, coefficient of friction, slip coefficient, slip resistance rating, and friction coefficient all […]

New Study Shows Sotter Engineering to be one of World’s Most Accurate Pendulum Floor Slip Test Labs

A recent global interlaboratory program “Slip Resistance Proficiency Testing — Pendulum Friction Tester,” showed Sotter Engineering Corporation’s Safety Direct America (SDA) floor slip resistance testing laboratory to be one of the world’s most accurate in use of the pendulum skid tester. The pendulum is a national standard for pedestrian floor and tile slip resistance testing […]

Comments Off on New Study Shows Sotter Engineering to be one of World’s Most Accurate Pendulum Floor Slip Test Labs Continue Reading →