Tag: slip test

Does ANSI Tile Spec A137.1 help protect you from liability for slipping accidents?

If you specify or buy flooring based on a minimum wet dynamic coefficient of friction of 0.42, you may be vulnerable to charges of negligence if a slipping injury occurs on that floor. Here we tell you why, and how to avoid the situation. American National Standards Institute (ANSI) issued its standard A137.1, “Specifications for … Continue reading “Does ANSI Tile Spec A137.1 help protect you from liability for slipping accidents?”

Head Off Litigation with Third-Party Confidential Periodic Floor Slip Resistance Testing

Slips and falls can result from a wide range of causes. To avoid litigation your commercial property needs to be immune to claims that your negligence caused an injury. The most effective way of doing this is to have Safety Direct America periodically slip test your floors for slip resistance, and have your floor care … Continue reading “Head Off Litigation with Third-Party Confidential Periodic Floor Slip Resistance Testing”

Improving the World’s Most Sophisticated Floor Slip-Resistance Safety Standards

In June’s post we discussed situation-specific slip resistance safety standards, which reflect the use or function of a floor and the friction (coefficient of friction) demands placed on it. Many U.S. floor friction standards are “one size fits all” — for instance, a wet dynamic coefficient of friction (DCOF) of 0.43 is considered adequate for … Continue reading “Improving the World’s Most Sophisticated Floor Slip-Resistance Safety Standards”

Three Common Fallacies about Floor Slip Resistance

There are three widely-held misconceptions about pedestrian slip resistance. If you’re aware of them it can help you avoid a nasty, expensive, and possibly life-changing surprise. Fallacy #1: “If a floor has a matte finish — that is, it’s not “shiny” —, it won’t be slippery when wet.” Truth is, many floors that have a matte … Continue reading “Three Common Fallacies about Floor Slip Resistance”

Situation-Specific Floor Slip Resistance Testing Standards

In the USA, pedestrian slip resistance standards for flooring have traditionally been pass-fail. For instance, a coefficient of friction (COF) of 0.60 might be considered “safe” but 0.59 was “not safe.” This applied to any situation provided the floor was level. Recently the American National Standards Institute (ANSI) has published some standards that are a … Continue reading “Situation-Specific Floor Slip Resistance Testing Standards”

Misleading ASTM C 1028 Friction Test Continues to Wreak Havoc in the USA

Misguided investments of hundreds of millions of dollars in slippery flooring … pain, suffering, and financial losses to accident victims and their families … lawsuits by the thousands … and lack of consumer confidence in ceramic tile and other hard flooring: these are some of the consequences of a poorly-conceived floor “slip-resistance” test — ASTM … Continue reading “Misleading ASTM C 1028 Friction Test Continues to Wreak Havoc in the USA”