Tag: pendulum tester

Video Explains IBC Requirements for Floor Slip Resistance

The 2012 International Building Code changed slip resistance requirements for indoor floors that may get wet in use. The previously-used ASTM C 1028 friction test method is obsolete, and testing using the AcuTest method in ANSI A137.1 slip test must show a minimum of 0.42 wet dynamic coefficient of friction — but many other factors … Continue reading “Video Explains IBC Requirements for Floor Slip Resistance”

Natural Stone with Sustainable Slip Resistance Wet

Flooring that gets high foot traffic and can get wet or greasy in use needs slip resistance (or skid resistance) that stands up well under wear rather than losing its wet slip resistance after a few weeks. McDonalds Restaurants spent years in research and devised a laboratory slip test that assesses how well the wet … Continue reading “Natural Stone with Sustainable Slip Resistance Wet”

Stop Slips on Cruise Ships!

Since 2008, Safety Direct America has been helping some of the world’s foremost cruise ship companies to prevent slips and falls by helping their designers choose flooring appropriate to the situation (with the correct level of wet coefficient of friction). The work improves safety both on new cruise ships and on ships that are routinely … Continue reading “Stop Slips on Cruise Ships!”

How to Prevent Slips and Falls on a Swimming Pool Deck

Unfortunately, many swimming pool decks are slippery when wet as installed! This can and too often does lead to severe accidents for both children and adults. The deck that was supposed to supply fun for the family, club members, or the public becomes a liability that causes pain, suffering, expensive medical treatment, and income losses. … Continue reading “How to Prevent Slips and Falls on a Swimming Pool Deck”

What’s the Difference Between the Three ANSI standards for floor slip resistance?

The American National Standards Institute (ANSI) has three pedestrian floor friction standards involving tests using the BOT-3000E digital tribometer, intended for testing flooring for indoor use. Why do they have three standards, and what’s the difference between them? They all have different test methods and different minimum coefficient of friction values (0.42, 0.43, and 0.60). … Continue reading “What’s the Difference Between the Three ANSI standards for floor slip resistance?”

Does ANSI Tile Spec A137.1 help protect you from liability for slipping accidents?

If you specify or buy flooring based on a minimum wet dynamic coefficient of friction of 0.42, you may be vulnerable to charges of negligence if a slipping injury occurs on that floor. Here we tell you why, and how to avoid the situation. American National Standards Institute (ANSI) issued its standard A137.1, “Specifications for … Continue reading “Does ANSI Tile Spec A137.1 help protect you from liability for slipping accidents?”

Situation-Specific Floor Slip Resistance Testing Standards

In the USA, pedestrian slip resistance standards for flooring have traditionally been pass-fail. For instance, a coefficient of friction (COF) of 0.60 might be considered “safe” but 0.59 was “not safe.” This applied to any situation provided the floor was level. Recently the American National Standards Institute (ANSI) has published some standards that are a … Continue reading “Situation-Specific Floor Slip Resistance Testing Standards”

Variables that Affect Slip Resistance of Polished Concrete

At the 6th Annual International Concrete Polishing & Staining Conference in Atlanta in September 2013, a panel discussion was organized and chaired by Ken Fisher of Nu-Safe. On the panel were the manufacturer of the BOT-3000E tribometer (floor slip resistance test meter); an Orlando attorney for large international property owners; and slip and fall prevention … Continue reading “Variables that Affect Slip Resistance of Polished Concrete”