Tag Archives: british pendulum

BOT-3000E Manufacturer Advises Against Using ANSI/NFSI B101.3 and B101.1 to Assess Floor Slip Resistance

The manufacturer of the BOT-3000E digital tribometer is Regan Scientific Instruments of Carrollton (Dallas), Texas. Recently we asked Regan for an update on ANSI B101.3, “Test Method for Measuring Wet DCOF of Common Hard-Surface Floor Materials,” approved January 18, 2012, and ANSI/NFSI B101.1. We received a reply from Peter Ermish, President. Here’s part of his […]

Comments Off on BOT-3000E Manufacturer Advises Against Using ANSI/NFSI B101.3 and B101.1 to Assess Floor Slip Resistance Continue Reading →

ASTM F2508 and the pendulum slip resistance tester

ASTM F2508 is based on a rigorous scientific study of 11 tribometers (or floor slip resistance test devices) that was held at the University of Southern California Medical Center. The peer-reviewed results were published in 2010 in the Journal of Forensic Sciences. Four tiles were tested with the 11 slip test devices, and later a […]

Test Your New Pool Deck’s Slip Resistance BEFORE Opening the Pool!

It is amazing how often both large and small swimming pool decks are installed with no thought to wet slip resistance until falls, sometimes catastrophic, begin to happen. By the time the first serious slip injury happens, the flooring vendor has usually cashed his check and is unconcerned about the problem. Wet bare feet have […]

Comments Off on Test Your New Pool Deck’s Slip Resistance BEFORE Opening the Pool! Continue Reading →