Archive | Slip Resistance Testing

RSS feed for this section

Tools Essential to Slip Resistance Testing

At Safety Direct America, not only do we specialize in expert floor and tile slip resistance testing both in the lab and in the field, we also offer the finest collection of slip test instruments to help you determine and monitor your slip risk effectively.  National standards-setting organizations including ASTM, ANSI, BSI, ISO, and others […]

ASTM F2508 and the pendulum slip resistance tester

ASTM F2508 is based on a rigorous scientific study of 11 tribometers (or floor slip resistance test devices) that was held at the University of Southern California Medical Center. The peer-reviewed results were published in 2010 in the Journal of Forensic Sciences. Four tiles were tested with the 11 slip test devices, and later a […]

Test Your New Pool Deck’s Slip Resistance BEFORE Opening the Pool!

It is amazing how often both large and small swimming pool decks are installed with no thought to wet slip resistance until falls, sometimes catastrophic, begin to happen. By the time the first serious slip injury happens, the flooring vendor has usually cashed his check and is unconcerned about the problem. Wet bare feet have […]

Comments Off on Test Your New Pool Deck’s Slip Resistance BEFORE Opening the Pool! Continue Reading →

DCOF Rating for Floors

The latest American slip test for floors is the DCOF rating test method specified in ANSI A326.3. Although this test is a much better test than the now-withdrawn ASTM C1028 that was previously included in the International Building Code, the new test method comes with a great deal of “disclaimers”, including the warning that a […]

A Caveat about Dal-Tile’s Situation-Specific Minimum DCOF AcuTest Values

This blog has previously praised Dal-Tile for recognizing that “one size fits all” does not work when it comes to slip resistance standards (or bikinis, for that matter). For instance, Dal-Tile has recommended a minimum ANSI A137.1 DCOF AcuTest wet dynamic coefficient of friction of 0.60 for swimming pool decks, public showers, and locker rooms. […]

Comments Off on A Caveat about Dal-Tile’s Situation-Specific Minimum DCOF AcuTest Values Continue Reading →

Why We Offer a “Recommended Tile Slip Test Package”

When our clients ask for an ANSI/NFSI A137.1 test we often recommend that they order a pendulum test as well. The pair of floor slip resistance tests is popular, and we offer a discounted price of $414.00 (for lab testing) when they are ordered together. The reason has to do with the A137.1 standard — […]

Dal-Tile Recommends Situation-Specific Minimum DCOF AcuTest Values

We have pointed out before that the ANSI A137.1 “DCOF AcuTest” and ANSI A326.3 minimum recommended wet dynamic coefficient of friction (DCOF rating) for level wet indoor areas of 0.42 is “one size fits all” and does not consider the use of the flooring — upstairs elevator lobby, commercial kitchen, pool deck, etc. The traction […]

Comments Off on Dal-Tile Recommends Situation-Specific Minimum DCOF AcuTest Values Continue Reading →

America Gets Another Terrible, Horrible, No Good, Very Bad Slip Resistance Guideline

Wet, bare feet are soft and essentially treadless, and on a slippery hard floor can be treacherous — leading to falls that sometimes cause permanent brain damage or worse. It’s crucial to provide slip-resistant surfaces at swimming pools where people (some of them sober) will be walking, playing or running (even against the rules) with […]

Comments Off on America Gets Another Terrible, Horrible, No Good, Very Bad Slip Resistance Guideline Continue Reading →

Pendulum: The Most Widely Used Slip Resistance Test Worldwide

The pendulum skid tester, known in the U.S. as the “British pendulum” although it was invented at the U.S. National Bureau of Standards, is the most widely used floor slip resistance tester worldwide for measuring the slip resistance of pedestrian surfaces (DCOF rating). It is a national floor slip test standard in at least 50 […]

Comments Off on Pendulum: The Most Widely Used Slip Resistance Test Worldwide Continue Reading →

ANSI Issuing Another Standard Slip Test Method for Flooring Materials

The American National Standards Institute (ANSI) is issuing a new test method, with minimum dynamic coefficient of friction (DCOF rating), for slip resistance of hard flooring materials, wet or dry, laboratory or field testing. No minimum DCOF is provided for exterior applications. The BOT-3000E digital tribometer is used for the testing. The Secretariat for the […]

Comments Off on ANSI Issuing Another Standard Slip Test Method for Flooring Materials Continue Reading →