The National Safety Council’s (NSC) latest published statistics show that falls are causing 28,000 deaths in the USA annually (see p. 19 of their report). This is the equivalent of a 9/11/2001 attack every six weeks, all year long. Moreover, falls deaths are approaching motor-vehicle deaths. Safety Direct America offers products and services that can … Continue reading “Falls Deaths in the USA: a 9/11 Every Six Weeks”
Category: Floor slip resistance safety standards
Natural Stone with Sustainable Slip Resistance Wet
Flooring that gets high foot traffic and can get wet or greasy in use needs slip resistance (or skid resistance) that stands up well under wear rather than losing its wet slip resistance after a few weeks. McDonalds Restaurants spent years in research and devised a laboratory slip test that assesses how well the wet … Continue reading “Natural Stone with Sustainable Slip Resistance Wet”
Stop Slips on Cruise Ships!
Since 2008, Safety Direct America has been helping some of the world’s foremost cruise ship companies to prevent slips and falls by helping their designers choose flooring appropriate to the situation (with the correct level of wet coefficient of friction). The work improves safety both on new cruise ships and on ships that are routinely … Continue reading “Stop Slips on Cruise Ships!”
OSHA’s “Suggestion” for Minimum Floor Coefficient of Friction (COF)
We often hear the question, “What does OSHA require for floor slip resistance?” The answer is that OSHA doesn’t require anything, but nevertheless has caused a lot of confusion for employers and the public on this subject. There has never been an official OSHA slip test or safety standard for flooring. In a nonmandatory appendix … Continue reading “OSHA’s “Suggestion” for Minimum Floor Coefficient of Friction (COF)”
How to Prevent Slips and Falls on a Swimming Pool Deck
Unfortunately, many swimming pool decks are slippery when wet as installed! This can and too often does lead to severe accidents for both children and adults. The deck that was supposed to supply fun for the family, club members, or the public becomes a liability that causes pain, suffering, expensive medical treatment, and income losses. … Continue reading “How to Prevent Slips and Falls on a Swimming Pool Deck”
What’s the Difference Between the Three ANSI standards for floor slip resistance?
The American National Standards Institute (ANSI) has three pedestrian floor friction standards involving tests using the BOT-3000E digital tribometer, intended for testing flooring for indoor use. Why do they have three standards, and what’s the difference between them? They all have different test methods and different minimum coefficient of friction values (0.42, 0.43, and 0.60). … Continue reading “What’s the Difference Between the Three ANSI standards for floor slip resistance?”
Do All Pedestrian Ramps Need the Same Coefficient of Friction?
The minimum safety standard for coefficient of friction for a pedestrian ramp should depend on the angle of the ramp and the weight of the separate load (shopping cart, wheelchair, gurney, etc.), if any, the pedestrian is controlling. However, that’s not how American safety standards are written. In the USA, traditionally safety standards for slip … Continue reading “Do All Pedestrian Ramps Need the Same Coefficient of Friction?”
Slip-and-fall Fraud — Some Clues
How can you avoid slip-and-fall scams on your property? First and foremost, eliminate hazards. The initial step is testing floor slip resistance before a fall is reported. Failing that, pay attention when someone reports a slip, even if it didn’t lead to a fall or injury. That report put you on notice — you can’t … Continue reading “Slip-and-fall Fraud — Some Clues”
Does ANSI Tile Spec A137.1 help protect you from liability for slipping accidents?
If you specify or buy flooring based on a minimum wet dynamic coefficient of friction of 0.42, you may be vulnerable to charges of negligence if a slipping injury occurs on that floor. Here we tell you why, and how to avoid the situation. American National Standards Institute (ANSI) issued its standard A137.1, “Specifications for … Continue reading “Does ANSI Tile Spec A137.1 help protect you from liability for slipping accidents?”
Improving the World’s Most Sophisticated Floor Slip-Resistance Safety Standards
In June’s post we discussed situation-specific slip resistance safety standards, which reflect the use or function of a floor and the friction (coefficient of friction) demands placed on it. Many U.S. floor friction standards are “one size fits all” — for instance, a wet dynamic coefficient of friction (DCOF) of 0.43 is considered adequate for … Continue reading “Improving the World’s Most Sophisticated Floor Slip-Resistance Safety Standards”