The most recent American National Standards Institute (ANSI) dynamic coefficient of friction (DCOF) test method, ANSI A326.3, states that “hard surface flooring materials suitable for level interior spaces expected to be walked upon when wet with water shall have a wet DCOF of 0.42 or greater when tested … as per this standard.” The older […]
Archive | DCOF Rating
RSS feed for this sectionWhat’s the Cost of a Slip and Fall on a Commercial Property?
A recent article in Risk & Insurance (May 2018, p. 32) cites some data for costs of slip and fall claims. Claims can result in a sharp increase in insurance premiums. If the property is self-insured, costs can come directly off profit. Falls among adults are the most common cause of traumatic brain injury. Commercial […]
ASTM F2508 and the pendulum slip resistance tester
ASTM F2508 is based on a rigorous scientific study of 11 tribometers (or floor slip resistance test devices) that was held at the University of Southern California Medical Center. The peer-reviewed results were published in 2010 in the Journal of Forensic Sciences. Four tiles were tested with the 11 slip test devices, and later a […]
Test Your New Pool Deck’s Slip Resistance BEFORE Opening the Pool!
It is amazing how often both large and small swimming pool decks are installed with no thought to wet slip resistance until falls, sometimes catastrophic, begin to happen. By the time the first serious slip injury happens, the flooring vendor has usually cashed his check and is unconcerned about the problem. Wet bare feet have […]
DCOF Rating for Floors
The latest American slip test for floors is the DCOF rating test method specified in ANSI A326.3. Although this test is a much better test than the now-withdrawn ASTM C1028 that was previously included in the International Building Code, the new test method comes with a great deal of “disclaimers”, including the warning that a […]